загрузка...

Mold Making and Casting Tip: Prop Hammer

How to make a prop hammer with rigid foam and in-mold painting techniques. By painting the mold before casting the paint transfers to the cast part to get the best possible paint+foam bond. Little finish work is needed.
Категория: Howto & Style
Время: 00:07:05.250
Теги: resin cast painting faux finishing foam casting spfx special effects prop making silicone mold molding
 

Vacuum Forming Mold Making - Maker Faire 2008

I saw this guy, Richard Jacobsen, demonstrate how to make a vacu-form mold using parts in total that all costs less than $300. He was a super nice guy, and his demonstration was perfectly clear. All you need is a heat source, plywood frames to hold the styrene (plastic), a rubber mat with a hole in it, and a shop vac. It worked brilliantly.
Категория: Science & Technology
Время: 00:01:06
Теги: vacuum forming mold making pseudoreid maker faire 2008 california richard jacobsen
 

Mold Making and Casting Tip: Mixing Hydrocal Plaster

Pouring a lifecast with Hydrocal Plaster. Here are some mixing tips for White Hydrocal. Whether you are making a plaster mold or casting with plaster, this is the basic mixing method.
Категория: Howto & Style
Время: 00:04:51
Теги: hydrocal accucast alginate lifecast lifecasting molding mold making mask rubber silicone art sculpture
 

How To Test for Surface Mold with a Viable Mold Test Kit

How to test for surface mold with a Viable Mold Test Kit from HomeMoldTestKit.com. These kits can also be used to test indoor air quality.
Категория: Howto & Style
Время: 00:02:34.500
Теги: mold mildew water damage detection household surface test testing kit flood flooding air quality inspection inspectors
 

In-mold Labelling - example Japan factory

In-mold Labelling - example Japan factory
Категория: Howto & Style
Время: 00:01:08.250
Теги: IML In-mold Labelling SIMCOHK
 

The Mold - Shocked - (Part 3)

Yeah, I really did get freaked out haha. To play this, go to www.coolbuddy.com --------------------------------------------------------------------------- TWITTER - twitter.com FACEBOOK - www.facebook.com CELL PHONE VLOGS - www.youtube.com LIVE STREAM - www.justin.tv MORE COMMENTARY - www.bit.ly MORE REAL LIFE STUFF - www.bit.ly BUSINESS EMAIL - dezmondac at gmail ---------------------------------------------------------------------------
Категория: Gaming
Время: 00:05:10.500
Теги: azuritereaction flash PC windows computer commentary video game television keyboard mouse videos action horror 3D graphics live audio camera face reactions scared scream freaked future the mold gameplay part three yt:quality=high playthrough walkthrough comedy jokes humor gaming conspiracy technology machinima director partner another monotony online scary funny creepy fps weird screaming games
 

Weird white mold in our basement

Категория: Entertainment
Время: 00:00:51
Теги: mold
 

Identifying mold in areas of your apartment where mold continues to grow.

This footage was taken from the furnace room with the water heater and furnace together. The water damage that was done was to the furnace area which contains the furnace and the water heater. When the furnace is not replaced and the water heater it makes the problem worse and not better. I used Pro-Lab kit for testing mold in the furnance. "Medical studies have found that mold is the #1 cause of allergic symptoms." www.prolabinc.com. I purchased the kit from Lowes. I had the test done for mold and the outcome was not good. (Waterside at Castleton northeast of Indianapolis) Information taken from Pro-Lab report dated Apr 24, 2008: If YES: One or more of the samples in this report indicates the presence of elevated indoor mold spores or colonies for these specific locations only. Professional advice will be necessary to determine the appropriate actions to take to correct the conditions indicated. If NO: The samples in this report do not indicate the presence of elevated indoor mold spores or colonies for the specific locations only. If Inconclusive: No comparison sample received. The mold identified in this report is often associated with excess moisture and can be a problem in indoor environments at high levels. Since mold requires water to grow, it is important to prevent moisture problems in buildings. The presence of mold, water damage or musty odors should be addressed immediately. In all instances, any source(s) of water must be stopped and the extent of water ...
Категория: People & Blogs
Время: 00:01:18
Теги: Mold
 

MacDermid Autotype Film Insert Molding (In Mold Decoration/IMD)

Film Insert Molding is a versatile and cost effective method of decorating and manufacturing plastic parts, best described as a method of In-Mold Decoration (IMD). The flat film is firstly reverse decorated (normally screen printed), then optionally formed, cut and finally back injection molded. With FIM you can easily integrate components such as lens and body into a single unit using just one piece of our formable hardcoated films.
Категория: Science & Technology
Время: 00:01:30.750
Теги: IMD FIM IML In Mold Decoration Film Insert Molding In Mold Labelling
 

How to make molds for custom PS3 Controller Buttons

This video will show you how to make molds for custom Playstation 3 controller buttons.Enjoy and please subscribe. Remember what you do to your controller is your responsibility. I take no blame for your actions and use proper safety precautions when using chemicals.
Категория: Science & Technology
Время: 00:06:42.750
Теги: ps3 controller playstation clear led buttons mod tuning mold pinkisil epoxy button trigger hack custom customization transparent translucent how-to games xbox game playstation 3 Xbox360 Nintendo Gameplay Ps2 Sony Psp Console Making tutorial Xbox 360 Wii Nintendo Wii Light Light-emitting Diode Lights
 
<<Prev | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 | Next>>