| CPU 1. Support for AM3 processors: AMD Phenom™ II processor/ AMD Athlon™ II processor * Due to chipset spec limitation, if you install AM3 CPU on this motherboard, the system bus speed will downgrade from HT3.0 (5200MT/s) to HT1.0 (2000 MT/s); however, the frequency of AM3 CPU will not be impacted. Please refer "CPU Support List" for more information. Hyper Transport Bus 1. 2000 MT/s Chipset 1. North Bridge: AMD 740G 2. South Bridge: AMD SB710 Memory 1. 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory 2. Dual channel memory architecture 3. Support for DDR3 1333/1066/800 MHz memory modules 4. Support for non-ECC memory modules Onboard Graphics(HD2000) Integrated in the North Bridge: 1. 1 x D-sub port 2. 1 x DVI-D port Audio 1. Realtek ALC888B codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel 4. Support for S/PDIF Out 5. Support for S/PDIF In 6. Support for CD In LAN 1. Realtek 8111D chip (10/100/1000 Mbit) Expansion Slots 1. 1 x PCI Express x16 slot, running at x16 2. 1 x PCI Express x1 slot 3. 2 x PCI slots Storage Interface South Bridge: 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices 2. 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices 3. Support for SATA RAID 0, RAID 1, RAID 10 and JBOD iTE IT8718 chip: 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive USB Integrated in the South Bridge: 1. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal ... |
