Car Paint Repair - How To Touch Up Auto Paint With Ease

...








yep.  We ship ...

yep.  We ship world wide.

does it available ...

does it available in Iraq ?

If you use the 3000 ...

If you use the 3000 grit SafeTSand sponge in the video you can safely get away with roughly 3 or 4 five second "scrubs" in the same spot.... if you were just trying to remove a clear coat scratch. In this video I was simply refining the block sanding to blend it. The SafeTsand 3000 grit sponge with replaceable latex paper was originally designed for wet sanding imperfections in fresh sprayed clear coat for auto body shops...it is very effective on fresh clear coat or older finishes.

We don't have ...

We don't have distributors in Australia yet. However we do ship world wide so you can buy direct from us. click the link in the description and you will be taken to our website and we will get you taken care of.

i could still see ...

i could still see the affected area ,i really think you should have added another tough up ,to build up the layers , but i now some people dont want to wait another 24 hours , anyway good job !

Hi do you guys sell ...

Hi do you guys sell these kits in Australia? I went to the site but couldn't find a contact email to discuss kits and shipping details. Thanks...

How do you know ...

How do you know when to stop sanding to prevent burning through the clear coat?

thank you

thank you

I think you apply ...

I think you apply too much TBSR paste, but that's just my humble opinion...

It all makes sense ...

It all makes sense now!!!

you are right black ...

you are right black is easiest to touch up. Yes so fresh reconditioned area dont stand out polish surrounding areas so everything has a nice luster. Body shops have to do this, repair a panel, spray it buff all adjacent panels to bring them back to original color due to oxidation etc. Yes the sealant is necessary to protect all of the polished area and the touch up paint as well. In the real world a pro sealant will last 6-8 months. apply 2X year spring & fall good to go

<---vinyl floor ...

<---vinyl floor installer...#1, I hear black is the easiest to touch up. 2, there was a quarter of a second of the finished area shown, real nice. 3, The car had to have had a clean/shiny/new spot afterwards. Clean spots stick out like sore thumbs sometimes too. 4, the sealer must take the place of clearcoat? How long with the sealer last under normal conditions?

the type of clear ...

the type of clear that is sold for hand touch ups is a different formula when compared to the base color. Hand applied (air dry -non catalyst) clear does not respond as nice as base color when you are talking about wet sanding or a "leveling" solvent. Some people mix a little bit of clear in with the base color and apply and just leave it without trying to blend it in or level it. once again...the clear just does not like to be messed with.

I don't use a clear ...

I don't use a clear coat on this type of repair. mobile touch up guys dont either. It will be sealed up just fine and permanent. I know all of the online consumer touch up paint companies say to use clear coat on top of the base....which is correct if you were spraying. But for shallow scratches, chips etc,in the real world, it just does not work so well. You end up with a bump of clear...which stands out like a sore thumb and I like a repair that you cant see..

When do u put ' ...

When do u put 'touch up clear coat' on?

Good point. I ...

Good point. I usually don't use my paint depth gauge on a simple touch up like this. However for sure would use it if I were doing a full on paint correction on a vehicle, using a DA or Rotary.

you didn't use a ...

you didn't use a paint thickness gauge

The best video on ...

The best video on youtube for a good touch up result!!! Gongrats!

Need a closer of ...

Need a closer of the areas

Actually the entire ...

Actually the entire process takes less than 45min (total time) to get a permanent pro result.  There is another method that requires a catalyst for the paint and solvent to level for even faster job. However I suppose if you don't really care all that much about your vehicle I guess u could use a sharpie felt pen?

good god man. 9 ...

good god man. 9 thousand step process. too time consuming, too much BS .... NEXT !!! FK that process